Electrical Solutions ltd

Goodship Expert Electrical solution ltd | Domestic Commercial Electrician Aylesbury

Building restaurants: planning and design

Building restaurants: planning and design

Did you know that in the United States alone, there are approximately 600,000 restaurants in the business? You can only imagine the ways in which each of them tries to distinguish himself from the other and that the approach to restaurant building projects is as varied as the restaurant itself concepts. Restaurant construction projects can be long and arduous and range anywhere from the renovation of an old building to the design of an entirely new site.

 

Plan your restaurant floor construction plan

In this article, we will provide insight into the various details, considerations, and intricacies of building restaurants, as planning and designing a restaurant layout requires more than just rearranging some tables.

What do you want people to think about when they enter?

First impressions are still important, which is why showing your restaurant from a customer’s perspective is the first place to start. The concepts of successful restaurants today relate to more than just good food or good service and there are hundreds of items to consider when it comes to restaurant design.

 

Your entrance is very important as other areas in your building plan and your restaurant layout should support your business flow while you can also connect your brand to customers. The entrance design should clearly suggest your restaurant concept and brand as this is the first experience customers will gain upon entering.

The lower entrances that make the mind

For most concepts, your entrance can be minimal, especially if you have a tape or countertop where customers can wait until their table is ready, but if you need to specify the parking space in advance, be sure to plan this area to allow traffic flow comfort, with the ability To accommodate the seats if possible. A few chairs work, but the wall bench has proven to be the best use of tight spaces.

 

If you're having trouble deciding how much space is adequate, experts agree that the six-step approach works best when it comes to allocating space between areas like exterior, entry, dining rooms, bars, eating meters, and restrooms.

Do you want customers to stay briefly or grab food quickly?

The type of restaurant you have will greatly influence the general design of your restaurant. There are many unique design features for an informal fast-food restaurant versus a fast-service restaurant or a full-service restaurant that will cause their layouts to vary greatly.

 

Fast Food Restaurants: If you own a fast-food restaurant, your design should enhance the natural renewable customer flow that creates spaces where your customers can progress naturally through the restaurant.

 

Quick Service Restaurants: You will work with a smaller space and you will need to think about creating a kitchen design that increases the amount of kitchen equipment that you can place inside small square shots and will likely need the same mindset when it comes to the customer’s seating area (as many seats as possible in the smallest area possible, Without feeling upset).

 

Full-service restaurants: These restaurants do not have a service table or area where the service line is formed, and most of your space will be allocated to customer seats with server stations nearby. Notable passages must operate throughout the restaurant so the servers can quickly and easily run food and beverages to their tables while also allowing your customers to flow naturally through the restaurant.

Our Services

Restaurant Design Firms Company in New York

Restaurant Development in New York

New York Restaurant Design

Renovate Restaurant in New York

Restaurant Interior Design Nyc

Restaurant Contractor Company in New York

Restaurant design NYC

Top Restaurant Design Firms in New York

Restaurant Designing Company in New York

Restaurant Designer Company in New York

Building Your Restaurant - Step 3 - Building

Building Your Restaurant - Step 3 - Building

The construction process is the step in creating your restaurant when things start moving. This does not mean that nothing happened before this point, but in general, there was not much in terms of a physical alteration of the site itself. Once construction begins, the entire project begins to become real.

 

During the restaurant building process

What you can expect throughout the construction process depends on the restaurant builder who hires to do the job. Each company has its own unique strategy. When working with RDDNY Restaurant Construction, you can expect this step of the process to include:

 

  • Weekly meetings were held with subcontractors to confirm the schedule going forward as well as safety compliance. This also provides an opportunity to discuss any current issues or new issues in more detail
  • Confirmation that all necessary insurance certificates and agreement signatures have been obtained from all subcontractors
  • Any newly required business law or safety labels have been installed along with a two-week schedule
  • Review the daily records of who was on the site and what was accomplished
  • Meetings involving all subcontractors before the start of the new business
  • Scheduling, tracking, and documents required for all required inspections
  • Create a positive slope for floor drain and waterproofing drains on wet walls
  • Protect the plumbing system from building debris
  • Keep up to date with updated graphics on-site and you will receive them upon completion of the project
  • Confirm the requirements of ADA compliance during work implementation
  • Ensure the quality installation and testing to reduce the possibility of rework
  • Marking or marking of all plumbing, electrical and mechanical equipment
  • Weekly business case reports are sent with photos sent to you every Monday in order to show progress and identify any pending issues that still require processing

 

Throughout the entire process, he will be a full-time site supervisor as long as any work is completed.

 

The company that specializes in establishing restaurants itself works as a call center and a central direction for all other parties involved in the project. This includes everyone from the architect to the owner, kitchen equipment supplier, subcontractors, design team, direct sellers, franchise holder if possible, and of course the owner.

 

The RDDNY project team coordinates each of these participants and makes sure everyone is up to date and knows what is expected of them and when to expect it. This effectively eliminates the need for assumptions or confusion regarding the progress of the business, ensuring the highest level of success.

 

Our Services

Restaurant Design Firms Company in New York

Restaurant Development in New York

New York Restaurant Design

Renovate Restaurant in New York

Restaurant Interior Design Nyc

Restaurant Contractor Company in New York

Restaurant design NYC

Top Restaurant Design Firms in New York

Restaurant Designing Company in New York

Restaurant Designer Company in New York

Building Your Restaurant - Step 5 - Warranty

Building Your Restaurant - Step 5 - Warranty

The guarantee that you receive through a restaurant construction specialist is a problem that you will already review throughout the selection process for the construction company itself. However, after the construction is completed and the project is closed, the benefit you obtained during these previous steps will start benefiting you.

 

Our warranty

When you work with RDDNY Restaurant Construction, both this company and all of its subcontractors provide a one-year warranty on both labor and materials.

 

The guarantee provides you with a definition of all responsibilities and limitations of the guarantees by contractors and subcontractors to repair the construction project work. Although this does not usually cover the construction process, per se, the restaurant owner usually does not need to consider this guarantee even after the construction approaches in order to search for additional repairs.

 

The warranty provides specific criteria for determining what is and is not considered to be work and/or defective materials. This is not the same tacit guarantee, that you'll see in contracts outside construction. It is important not to rely on an implied warranty when considering different construction companies as this could endanger your coverage.

RDDNY Restaurant Construction 

It is important for the success of your project to ensure that you are covered by an explicit warranty contained in the contract agreement, supplementary terms and conditions, specifications or plans. It is also important to understand what exceptions are and to request them in writing. If you are not sure of the details of your warranty coverage, take the time to explain to you by the construction company.

RDDNY Restaurant Construction is a restaurant construction company that takes its warranty seriously. This is not only an opportunity to demonstrate that the company stands behind the work and materials used in each the project, but also provides the opportunity to give each customer and provide the care and support they deserve.

 

Part of the one-year RDDNY guarantee includes a meeting with the restaurant owner or manager and restaurant builder at the 11-month mark after the restaurant opens. This provides an opportunity to review the entire project while the warranty is still valid.

 

At that time, the owner or manager can draw the attention of RDDNY Restaurant Construction to any necessary repairs, giving the company time to complete it on time.

 

Of course, you can call RDDNY at any time throughout the warranty period to order covered repairs, but meeting 11 months after the opening helps make sure the opportunity is not lost. After all, at this point, you will be very busy with your successful restaurant. This meeting ensures that you get all the support you need to maintain in this way.

 

Our Services

Restaurant Design Firms Company in New York

Restaurant Development in New York

New York Restaurant Design

Renovate Restaurant in New York

Restaurant Interior Design Nyc

Restaurant Contractor Company in New York

Restaurant design NYC

Top Restaurant Design Firms in New York

Restaurant Designing Company in New York

Restaurant Designer Company in New York

Six ways to stand in the competitive construction industry

Huge competition

If you want to stand out in the construction industry in Philadelphia or in our case of building restaurants, you will have to be strategic in this regard. Philly is one of the largest and oldest cities in America - there are already a lot of building agencies working! Here are principles that can help you stand out in Philadelphia, even in other municipalities.

 

Performing quality work

Now is an unparalleled time for the construction industry. The economy is good, and things will be built. Current political trends have a positive relationship with many of the contracting agencies. Even the wealthiest groups will grow with the tremendous work available.

 

So if you are going to take this opportunity right, you should do the best job possible. Cut any time or budget angles. Do the right thing the first time. Build a reputation on a solid foundation of quality services recommended.

Ask about reviews

If you do a good job, customers will be right to recommend your services. However, they may not do this in an organic way. It may not happen naturally. You may have to request good reviews and recommendations online. Even in this case, it may take customers a long time to publicly receive such acclaim.

 

You can expedite this process by writing your own review from the point of view of your satisfied customer, and running that review by the customer to see if they agree with them, then publishing them. This practice can be SOP (Standard Operating Procedures).

Participate in charitable community projects

Smaller contracting agencies may not be able to do this effectively, but again: they may be able to do so. Help the church. Building a school. Garden repair. We do all of this as a community guide. Also, be sure to hang up signs and the like to show the responsible construction company: your company.

 

When it comes to promotional items such as banners advertising your construction company, a comprehensive directory of materials can be found here; according to the site: “Regardless of which material you choose for the next promotional item, we are sure it will represent your brand with every fiber it contains. !

Maintain advanced building solutions

Get the latest tools. Well, get the latest power tools. Sometimes something that has not been properly tested will be released "in the field"; still "buggy". So you may want to do your homework before investing in new things. However, having the most modern equipment can give you a competitive advantage by reducing the cost of guarantees.

Integrate and improve operational efforts

You want to simplify operations as possible. Determine where costs are and how to overcome them. Find where "fat" can be cut from your operations. You want the right workers in the right place, and you don't want a surplus that distinguishes the different contracts your company works with.

A well-oiled business machine

If your construction agency did a good job, gained reviews, included charitable projects, using advanced solutions, improved operations, and had the right tools for the job, it would be in a position to compete effectively with similar contracting agencies. Your work machine will be ready, decorated with oil, and ready to go.

 

Our Services

Restaurant Design Firms Company in New York

 

Restaurant Development in New York

New York Restaurant Design

Renovate Restaurant in New York

Restaurant Interior Design Nyc

Restaurant Contractor Company in New York

Restaurant design NYC

Top Restaurant Design Firms in New York

Restaurant Designing Company in New York

Restaurant Designer Company in New York

 

Do I have to replace my Outlet?

If you think about it, it’s probably a yes.

Here are a few telling tales that your outlet has served its time.

Sockets are often used continuously for years without maintenance, they are usually very robust, but are all susceptible to damage that can be overlooked. If damage or other signs are not addressed, the outlet is not at its best; it can lead to a power failure and possibly be dangerous.

Cracks in Front of the Socket

An obvious but often overlooked. Cracks may appear, although years of wear or damage from an external source. Excessive heat caused by a malfunction at the back of a power outlet can also cause the front of the outlet to burst. Cracks not only expose live wires, but can also pose a serious fire risk due to the dust that accumulates therein. If you notice a crack, stop using that outlet until it is replaced.

Heat Scorching Marks

The accumulation of dust, overload and poor wiring can all cause electrical outlets to generate excessive heat that causes heat burns.

These types of markings are usually dark brown in color and are located on the outlet or plug, so both must be checked regularly. If you notice scorching spots or the plugs feel warm, disconnect the plug from the socket before disconnecting devices. The socket may only be used again after it has been correctly inspected. I have seen cases where so much heat has been generated that the shape of the socket and the plug are distorted and even fused.

Electricity Switches off Temporarily

If a device connected to your electrical outlet is switched off and then on again, you must first check that the device itself is not defective by connecting it to another electrical outlet. If the device works properly, this is a sign that there is a problem with your outlet. This can be caused by a number of problems, including loose connections at the back of the socket. Always ask a competent person to check the connection.

Blow fuses

Fuses that constantly blow can be very frustrating and can have various causes. If you have a fuse that continues to blow, try plugging the device into a different outlet. If the fuse does not blow into the new connection, there is probably a problem with the other one and this should be checked as soon as possible.

Green ‘goo’

If you have very old wiring from the 60s and early 70s, you can have green goo appear around the socket. This sticky goo is broken down “di-isotyl” a chemical reaction between copper and insulation in old cables and can still be found in some properties. If you notice this goo, you should contact a qualified electrician as soon as possible. Depending on the extent of the problem, this may mean that a new thread is needed.

Arcing Sounds

A crackling, buzzing or popping sound coming from your outlet indicates that something is wrong. This is called sparking. This is a small spark that jumps over the back of your outlet and is usually caused by damaged or loose wires. If you hear these noises, have the plug checked as soon as possible. Failure to repair the device may cause a small explosion or electrical fire in the back of an electrical outlet.

How do I prevent damage to my sockets?

It is advisable to visually check a power outlet every time you use it. Those who are always in use, such as the TV or the plug and the socket of the kettle, must be checked regularly.

Top tips to prevent damage to your sockets:

  • Avoid overloading sockets with extension cables. Never connect one extension cable to the other, as this can cause overheating. Try the socket overload calculator.
  • Do not purchase generic or inexpensive devices and only use recommended accessories for electrical equipment. For example, it is known that inexpensive replacement telephone chargers damage electrical outlets and cause electrical fires.
  • Only use plugs with the British standard safety mark.
  • Always carefully remove the plugs, do not pull on the cable.
  • Make sure there is enough space around the socket to allow airflow.

Do not leave furniture behind a plug that can bump into the socket or be pressed against it, which will put pressure on the socket.

 

Source: http://www.goodshipltd.co.uk

Why do my bulbs keep blowing?

Do I have to switch to LED lamps?

First, electricians call them lamps, but we know that most people call them light bulbs, so that’s what we’ll call them in this article.

Some of you may have a small supply of traditional lamps, but do you have to dump them for LED? We don’t waste here, so although they are very inefficient (80% of the energy that is converted into a traditional incandescent lamp is converted into heat, not light), you shouldn’t dump them yet. If you have purchased bulk to keep track of the number of bulbs that continue to blow, consider why they continue to blow and do something about it.

When a lamp blows, why does it blow the wick?

When a lamp blows, chances are that your fuse or circuit breaker will also burn out or trip, making the problem seem a lot worse than it is. The reason that a blowing lamp can cause a breaker to stumble is because just before the lamp fails, the element overheats and melts, the resulting resistance causes a surge of current that shuts off the breaker or blows the wick, which is not necessarily a problem, it is the Wick or the circuit breaker is doing its thing.

So why do my bulbs keep blowing?

There can be many reasons why your lamps keep blowing – here are some of the most common ones.

Cheap Bulbs

Unbranded lamps of lesser quality, which are often transported halfway around the world, burn out faster with normal use. These cheaper lamps are made of thinner materials, making them more susceptible to malfunctions and often have little or no quality control.

Cheap Lighting Fixtures

Unbranded luminaries of poorer quality are also often transported over large distances, which increases the risk of transport damage. These luminaries may be poorly designed, with poor airflow around the lamp fitting which then overheats the lamp causing it to malfunction more quickly.

Electricity Sparks

When a light bulb does not fit correctly in a fixture, it can lead to current (a very small spark) between the fitting and the light bulb. This arc can generate excess heat, causing the blub to blow prematurely.

This problem is more common with old or cheap fixtures, but can also occur with expensive new fixtures. When replacing a burned-out lamp, always check the old lamp and the fitting for dark or discolored and / or pitted areas that indicate sparks. If you notice discoloration or pits, ask for advice, as this may be the beginning of something that gets worse.

High Voltage

Only a small amount of excessive voltage is needed to drastically reduce the life of an ordinary light bulb. Just like electric sparks, high voltages can cause excessive heat.

Vibrations

Light bulbs are often very delicate, especially if they are made cheaply. Vibrations can come from a variety of sources, eg nearby devices, sound waves, slamming doors, footsteps from the floor above, ceiling fans, etc. If vibrations are the cause of light bulbs blowing, the switch to an LED light will remedy it.

Will the use of LED lamps reduce the risk of blowing lamps?

We recommend the use of LED luminaries and lamps that last at least 10 times as long as traditional light bulbs and are highly efficient in creating light, so no heat, so save money and reduce the risk of significantly blowing lamps. The reason for this is that LED lamps are generally not made of vulnerable components and they operate at a much lower wattage.

Did this help?

If this article has been relevant to you, you can call us. We can do a little research to see if there are any signs of underlying issues, and we recommend all the steps you need to take to prevent a minor inconvenience from becoming a much more expensive issue.

Contact us for more information.

 

Source: http://www.goodshipltd.co.uk

Devices for Surge Protection

Protection of Your Electrical Equipment

From 1 January 2019 The IET wiring regulations BS 7671: 2018 – Requires adequate protection for both people and equipment against temporary over voltages of atmospheric origin that are transferred via the power distribution system and against switching over voltages.

What does this mean?

Simply put, this means that we now have to protect our electrical systems against the effects of lightning and electrical peaks or power peaks from the electricity supplier. This is done through the use of a surge protector (SPD).

f:id:Goodship976:20191121205607j:plain

Why now?

In the last 20 years, the risk of death or injury has increased considerably, as have the financial costs for replacing goods, equipment and data that have been destroyed after a light attack or a power surge.

Why has the risk grown?

The use of computers and electronics has increased exponentially in the last two decades. There are more systems and these systems have become smaller, which means that less energy is needed to damage components and cause fire or explosion.

What effect does this have on you?

The regulations prescribe mandatory use of SPDs for most new installations. An exception to this is some houses – your house. Goodship Electrical Services offers you the possibility to mount an SPD as another layer for electrical safety.

What is an SPD?

An SPD is a small device that fits into your new consumer unit and protects your entire electrical system from damage caused by lightning and power surges from the electrical supply.

Why should I choose to have one SPD?

Our houses are full of electronic equipment, from TVs, washing machines and computers to Sky boxes, kettles and telephone chargers, our daily activities apply to this. Almost everything you plug into a power outlet would be destroyed by a lightning strike or a surge without an SPD. If you work from home, you can lose valuable and irreparable data from computers and backup disks.

Your electrician will determine if an SPD is needed during the system design.

 

Source: http://www.goodshipltd.co.uk

Why changes to the electrical regulations cost you money?

Since January 1, 2019, qualified and regulated electricians working at your home have been working on the 18th edition of the IET wiring codes BS 7671: 2018. Most electricians have updated their qualifications in recent months to reflect this change.

So how does this affect you?

The main reasons for the updated rules are to improve safety and to take into account the latest technological developments. The changes have been extensive and there are some fundamental changes in BS 7671: 2018 that, as a result, have to pay the customer for additional equipment for even the most basic electrical installations.

The most important changes that influence the costs of a new electrical installation.

f:id:Goodship976:20191121204952j:plain

1) Requirements for Metal Cable Supports:

When new wiring is installed, it must be supported in a certain way to prevent premature fire collapse. This is to ensure that in the event of a fire, escaping people or fire service personnel entering a property do not get entangled in the dark with loose cables. The days of applying trunking with sticky back or a few plastic cable clips are over. Cables must now be supported by metal clips and holders. Plastic trunking can still be used, but a sufficient amount of additional metal restrictions must be used.

Pros:

This will save lives.

Cons:

Small extra material costs.

2) Requirements for RCD Protection:

In fact, these changes mean that all circuits in a home require RCD protection, while previous requirements omitted some circuits, e.g. lighting.

Pros:

This prevents electrical shock.

Cons:

Extra material costs.

3) Requirement to Prevent Unwanted Circuit Breakers:

RCDs are very fast-running devices that disconnect the current in the event of a fault, resulting in large amounts of “RCD,” thus avoiding the risk of an electric shock. During normal operation, modern electrical equipment can also generate a very small amount of the same ‘earth leakage current’. In some cases, if there are multiple items of electrical equipment on the same circuit, the cumulative amount of “earth leakage current” may also activate an earth leakage circuit breaker. The new regulation provides a number of solutions to prevent these unwanted journeys, the most practical being to use a single RCD (RCBO) on each individual circuit. This is likely to double the cost of equipment for a new fuse board.

Pros:

This prevents electrical shocks and avoidable unwanted trips

Cons:

The costs of the equipment have risen enormously

4) Requirement for Adequate Protection against Temporary Spans of Atmospheric Origin:

To meet this in certain circumstances, your electrician must install an ‘Overvoltage protection (SPD)’. An SPD is a small device that fits into your new consumer unit and protects your entire electrical system from damage caused by lightning and power surges from the electrical supply.

Our houses are full of electronic equipment on which we rely on our daily activities. Almost everything you connect to a power outlet is destroyed by a lightning strike or a surge without SPD and this can cause a fire. If you work from home, you can lose valuable and irreparable data from computers and backup disks.

For most buildings with the exception of individual homes (your home) an SPD must be mounted on new work. In most individual homes, the risk is considered to be low enough that you do not need to have SPD installed, although you can choose to do this. If an SPD is mounted on a new fuse board, this can add £ 100 – £ 200 to the costs.

Pros:

SPDs save lives and property.

Cons:

The costs of the equipment have risen enormously.

While electricians and the electrical industry are getting used to the new regulations and how they are interpreted, it is important that the customer makes sure that his electrician is aware of the latest IET wiring regulations BS 7671: 2018 when requesting quotes for household electrical work.

Do not worry….

The regulatory change does not mean that your current electrical system is now unsafe or that an electrical test conducted after January 1, 2019 will not pass, but these must be applied to new installations. If in doubt, consult a registered electrician.

 
Source: http://www.goodshipltd.co.uk

5 Known Benefits of Hiring Skilled Electricians

When a person is confronted with electrical problems, one must be very careful. When small children are at home, parents must take the responsibility to make the electrical system seamless. Electricity is a necessity, but sometimes it can be fatal. To keep the business going, it would be great if you came into contact with some professional electricians in Milton Keynes. In this specific article, we would discuss in detail why hiring a professional electrician is important.

 

Electrical Maintenance Service Company, Electrician Milton Keynes, Electrician Leighton Buzzard Milton Keynes, Electrical Solutions Ltd Milton Keynes, Electrical Maintenance Service Company Milton Keynes

 

Save the Maximum Amount

 

Maximum homeowners are not trained when it comes to buying electrical items. Better to call a professional and let them do the job for you. They would prevent homeowners from spending quantum pounds. People often pay a lot of money for the wrong things. As a result, the overall wires in the house are often fragile.

 

Safety and Security

 

While working with electrical appliances, safety is paramount. Sometimes small problems occur and homeowners often tend to fix it all by themselves. Frankly, this can be fatal. Experienced electricians will always ensure that the problem is resolved quickly. The overall safety and security in a building complex or a house are very important.

 

Problem Solving

 

Quite a few people have problems with the general electrical device, but are not aware of the corrective option to be considered. If such problems are encountered, you should visit the certified electricians in Milton Keynes. An expert locates the problem immediately and they try to fix it immediately.

 

Protection of Electrical Devices

 

Many people are in favor of listening to music and watching their favorite movies. What would it be like to stand up and testify that their television music system is not working? Frustrating indeed. It is an ominous experience and you may not get enough motivation to buy electronic goods in the coming days.

 

It is advised to contact a professional electrician who would guide homeowners and inform someone about the devices that help to save power.

 

Goodship Electrical Milton Keynes, Electrical Service Company Milton Keynes, Expert Electrical Solutions Milton Keynes, Commercial Electrician Milton Keynes, Domestic Electricians Milton Keynes

 

Customized Task and Peace of Mind

 

There would be prior warnings that potential hazards must be ensured when installing wires and devices. While the installation is being carried out, care must be taken to close the deal with an electrician. By recruiting a professional, you can be sure that there is peace of mind because the task is performed by experts.

 

Source Url: https://electricalsolutionsltd.blogspot.com/2019/12/5-known-benefits-of-hiring-skilled.html

Goodship Electric Christmas Lighting Installation

It is really Christmas when the decorations are gone, whether a traditional wreath is on the door or an extravagant Christmas lighting display.

 

If you are afraid to go into the loft, untangle your lights and go up the stairs to scale up the house this festive season, we can help!

 

We understand that you may not have the time, equipment, skills (or patience) to safely put on your Christmas lights, so why not let one of our fully trained electricians do it?

 

Whether you are a homeowner or business owner, we can offer a personal, hassle-free installation of Christmas lights.

 

Goodship Electrical Milton Keynes, Electrical Service Company Milton Keynes, Expert Electrical Solutions Milton Keynes, Commercial Electrician Milton Keynes, Domestic Electricians Milton Keynes,

 

Our Christmas Lighting Installation Service

 

Unlike many dedicated Christmas decorators, we are qualified electricians - which mean we can advise you and perform additional electrical work that may be needed to correctly install your lighting; or that is an extra circuit with RCD protection or a new waterproof external socket.

 

Our Christmas Lighting Installation Service Includes:

 

Initial design interview to discuss your requirements, including the style lighting, available power outlets and where you want them installed. This can be a site visit if you need a more complex design.

 

One of our fully qualified electricians will then come to your home or business premises and gets your lights on these can be your own lights or we can take care of them for you.

 

In the unlikely event that maintenance or repair of the lights is needed during Christmas, we are ready to help.

 

After the festive period, our electricians return to your home to take down the decorations.

 

Specialized Service for Commercial Areas

 

If you own a commercial property that is often visited by customers and customers, you want to make sure that you make the right impression. Commercial buildings that we have previously worked with include: 

  • Office space
  • Stores
  • Shopping centres
  • Restaurants, bars and cafes
  • Hotels

 

Whether it is a few lights in the window or an extravagant display, we have the tools and expertise to handle any job large or small.

 

What's more, we comply with all relevant health and safety legislation and we are Which? Trusted traders and NICEIC approved electricians, so you can be sure that all electrical work is carried out to the high standards of these organizations.

How Safe Are Your Christmas Lights?

You have probably used the same set of lamps in your home or business for as long as you can remember, but how safe are they?

 

Traditional lights such as light bulbs or lantern lights become very hot and are prone to breakage, which increases the risk of fire, especially if they are wrapped around a Christmas tree. So what's the solution?

 

Modern LED lighting is recommended as a replacement for traditional Christmas lighting by the electrical safety board. The use of LED lighting has a number of advantages, including:

 

  • Significantly reduced risk of electric shock, because LEDs operate at a very low voltage.
  • LED lighting can use up to 90% less energy and can yield significant savings on energy bills.
  • Made from highly durable materials, the risk of an LED break is much lower than with traditional lighting. This is not only safer, but also offers more value for money.
  • LEDs produce "cold light", which means that they do not get hot during use. This reduces the risk of fire or burns.
  • LEDs are generally a lot brighter than traditional lighting, which ensures an even better display.
  • The longer lifespan and energy consumption in combination with the fact that LEDs are usually recyclable, all contribute to less carbon
  • For more information about electrical safety, view our blog about the importance of electrical safety awareness at Christmas.

 

Your Local, Friendly Electrician

 

If you are afraid of turning on your Christmas lights this year or want to make your office stand out with a complicated display, we can help you!

 

Electrical Maintenance Service Company, Electrician Milton Keynes, Electrician Leighton Buzzard Milton Keynes, Electrical Solutions Ltd Milton Keynes, Electrical Maintenance Service Company Milton Keynes

 

For more information or to ask a question about how you can safely install your own Christmas lights, call us today at 01908 920292 or fill in a contact form below and we will contact you.

 

Source Url: https://electricalsolutionsltd.blogspot.com/2019/12/goodship-electric-christmas-lighting.html

Source: http://electricalsolutionsltd.blogspot.com/2019/12/goodship-electric-christmas-lighting.html

6 Signs Your Socket Must Replace

Plugs, plugs, sockets, sockets, whatever you want to call them - they are an essential part of every home and provide constant power to lamps, refrigerators, TVs and other devices that we could not live without.

 

Unfortunately, with sockets that are often used continuously for years without maintenance, they are prone to damage that can be overlooked. Failure to address a socket outlet can result in power outages, electrical fires, and costly repairs.

 

Electrical Maintenance Service Company, Electrician Milton Keynes, Electrician Leighton Buzzard Milton Keynes, Electrical Solutions Ltd Milton Keynes, Electrical Maintenance Service Company Milton Keynes

 

In our latest blog post we look at 6 significant signals that it is time to replace your sockets, along with some top tips to extend the life of your sockets.

Electric Switches Temporarily

If devices connected to your sockets are sporadically switched off and then on again, first check that the device itself is not defective by connecting it to another socket. If the device works properly, this may be a sign that your outlet has been damaged. This can be caused by a number of problems, so it's best to have it viewed or replaced by a professional.

Heat Scorch Brands

Corrosion, dust accumulation, overloading and poor wiring can all cause sockets to generate excessive heat when used. If you notice scorching spots or hot plugs and sockets, switch off the wall socket before disconnecting devices; Failure to do so may cause electrical fire. Note that the socket may no longer be used until it has been properly inspected.

Fuse Blues

Fuses that constantly blow can be very frustrating and can be caused by a number of things. If you have a fuse that continues to blow, try plugging the device into a different outlet. If it does not burn out, there is probably a problem with the outlet. 

Cracks On the Power Outlet Plate

Over time, the plastic plates covering electrical outlets can become worn and crack. Cracks not only expose wires under tension, but can also pose a serious fire hazard due to the dust that settles in them. If you notice a crack, stop using that outlet until it is attached or replaced.

The Green "Goo"

This stuff has many names, but can be characterized by its green appearance and high viscosity. The goo is broken down "di-isotyl", a result of the reaction between the copper and the wiring insulation from 1965 and 1971.

 

If you notice this unwanted goo, you should contact a qualified electrician as soon as possible, depending on the severity and extent of the problem, a new wire may be needed.

Sound Buy

A crackling, popping or buzzing sound from your outlet indicates that something is seriously wrong. This is called sparking and is usually caused by damaged or loose wires. Without being inspected, this can lead to a faulty plug or a more serious electrical fire.

Highest Tips for Preventing Damage To Your Connections

There is plenty you can do to reduce the risk of damaging your power outlets here are some of our best tips:

  • Never buy devices from indisputable stores or sellers. For example, it is known that cheap knock-off telephone chargers damage electrical outlets and cause electrical fires.
  • Visually inspect your sockets monthly for any of the signs above.
  • Always carefully remove the plugs, do not pull on the wire. This is something children can do unintentionally, so make sure your children understand the dangers of electricity.
  • Avoid overloading sockets with extension cables. Never connect one extension cable to the other, also called 'daisy chaining', as this can cause overheating.
  • Only use plugs with the British standard safety mark.

 

Your Local Friendly Electrician Bristol and Bath

At Goodship Electrical we gladly quote smaller orders, such as replacing sockets or sockets, but also more extensive orders, such as complete cords for the home. In addition to regular sockets, we can install modern sockets such as USB and HDMI.

 

Goodship Electrical Milton Keynes, Electrical Service Company Milton Keynes, Expert Electrical Solutions Milton Keynes, Commercial Electrician Milton Keynes, Domestic Electricians Milton Keynes

 

If you want to replace a power outlet, add a new one or need some advice on whether it's time to have yours replaced - call us today for free at: 01908 920292 or fill in a contact form below and we will call you back.

 

Source Url: https://electricalsolutionsltd.blogspot.com/2019/12/6-signs-your-socket-must-replace.html

Source: http://electricalsolutionsltd.blogspot.com/2019/12/6-signs-your-socket-must-replace.html

You Must Call a Commercial Electrician 3 Times

The commercial electricians at Goodship Ltd want to make sure you know the difference between a domestic electrician and a commercial electrician.

 

Many people make the mistake of thinking that all electricians are the same, but the truth is that they differ based on the complexity and nature of electrical tasks required for the home and in a commercial building.

 

Domestic Electricians AylesburyElectrical Service Company AylesburyExpert Electrical SolutionsGoodship ElectricalElectrical Solutions Ltd

 

The Complexity of the Electrical System of a Commercial Building

 

  • The electrical layout of a residential building is very different from the layout of a commercial building.
  • Commercial buildings often require circuits and transformers that can handle a higher level of electricity, and larger and more complicated electrical systems.
  • Wondering if you should call a commercial or household electrician? The answer is simple: if an electrical emergency has occurred in a commercial building, company, warehouse, office or factory, you need a commercial electrician.
  • Of course, if it is an emergency, you must also ensure that the electrician you choose offers a quick response service so that they can come to the site as quickly as possible to investigate and solve your problem.
  • However, when you call the emergency electrician, make sure that he is able to deal with the often heavy electrical systems of a commercial property.
  • We don't want you to think that residential electricians are less capable electricians. They are just as good at their job as a commercial electrician.
  • It is just that an electrician in a home is trained to look for different problems and to overcome other power needs than an electrician.
  • Which ultimately means that an electrician who work only on domestic property can be out of his or her field when called for commercial real estate.

1.       Power Failure at Work - Contact a Commercial Electrician

 

  • We often hear our customers ask why they can't just call an electrician for a power outage.
  • We always hear the same question. "It's all the same, isn't it - it's just a power outage."
  • Commercial buildings require a completely different electrical arrangement because they have to bear a higher energy load.
  • This means that when a residential electrician looks at an electrical layout of commercial properties, they are not equipped with the right knowledge to find and resolve the cause of the problem.
  • Indeed, in some cases hiring a household electrician to deal with a commercial power outage can ultimately do more harm than good.
  • In that sense, it will cost you much more money in the long run because you may have to hire a commercial electrician to repair the damage caused by the residential electrician.

 

2.       Electric Fire Hazard - Make Sure Your Emergency Electrician Is Also an Experienced Commercial Electrician

 

  • When an electrical fire starts at home, it is usually caused by faulty wiring, extension cords or even the use of the wrong light bulbs.
  • In the workplace, however, an electric fire can be caused by a number of different other problems.
  • A commercial electrician is trained to identify a wider range of possible causes for an electrical fire.
  • The equipment itself may, for example, be defective and cause an electric fire.
  • If the problem lies in the wiring of the building itself, you don't want an electrician trying to fix it.
  • As we have said, commercial buildings and domestic buildings are completely wired differently and for separate purposes.
  • A commercial electrician understands how commercial buildings are cabled and knows what to look out for to solve the problem and prevent it from happening again in the future.

 

3.       Safety Switch Switches off - Call An Electrician As Soon As Possible

 

There are three main reasons why a safety switch turns off:

 

  • Damaged wiring
  • Defective devices or machines
  • Broken safety switches

 

Now we know what you think - all these problems can affect a home.

 

So isn't it logical that an electrician in the home could solve this problem in a commercial building?

 

To touch a theme that you may have picked up in this blog residential and commercial electrical system and the needs they meet are completely different.

 

Wiring a commercial building requires different skills than wiring a residential building. This means that solving a problem in the wiring of a residential building may require different skills than a commercial building.

 

It is important to ensure that you have a commercial emergency electrician's number to hand so that you are always prepared for an electrical emergency.

 

Need an emergency electrician who is also an experienced commercial electrician?

 

Call Goodship Ltd Electrical today!

 

Our team at Goodship Ltd offers both commercial and emergency services for electricians to the people of Aylesbury.

 

We are proud to offer quality service to all our customers by: 

 

  • Reliable
  • Polite
  • On time
  • Recognized

We have more than 10 years of experience in offering a range of electrical services to our customers and just like you, our community is important to us.

 

That is why we have an environmentally friendly service and support charities where possible.

 

Commercial Electrician AylesburyElectrician Leighton BuzzardElectrician AylesburyElectrical Maintenance Service CompanyElectrical Maintenance Service Company Aylesbury

 

If you are looking for a fast-responding commercial electrician that you can count on in an emergency, contact us today.

 

You can call our team 24/7 on 01908 920292 or work online with us!

 

Source Url: https://electricianleightonbuzzard.blogspot.com/2019/11/you-must-call-commercial-electrician-3.html

Source: http://electricianleightonbuzzard.blogspot.com/2019/11/you-must-call-commercial-electrician-3.html